but my PC doesn’t need a better PSU and it has used this one for a good couple of years or so.

post specs
does it happen to any video file? an HD vid can stress out cpus
have you tried different media players?

uninstall/update drivers?
any other vid card you can try out?

appears to happen with all video files, youtube etc work fine though

tried several players

might have a go at stripping codecs, drivers and directx and starting again

no other card to try out

your rig should play most vids but would work its ass off with HD content.
do try updating the drivers and shit. use drivercleaner if you can.
also check your temps (cpu/vid card). the hang reboot can also be caused by overheating.

That doesn’t mean it’s not dying.

True, any suggestions on methods of creating a load elsewhere on the PC? (Yea HD content never did work too well) I can’t find a sensor on the GFX card but the CPU temp is fine even throughout the spikes. Even loading a shitty FLV locally kills it.

No related posts.

I can pull 3h+ still with my MB with my battery at 74% life.

Time to head to the apple store.
While connected to wifi? While hitting the processor with a lot of SQL?

Well no shit your battery is only lasting 2h if you have heavier cpu usage.

With wifi and bt. No high cpu usage. Mostly surfing with music. Sometimes eclipse is open and ill be coding. Still can do 3h w/o problems
My old Pentium 3 laptop pulls 14 watts at 100% cpu usage with Wifi on.

Or at least, that’s what Kubuntu’s power meter is telling me.
SSD’s are still young though. spinning hard disks have gone as far as they ever will. yeah, they may continue to make them spin faster (and thus need more power and make more noise), they may continue to increase density they may increase cache size and they may make changes to the controllers (IDE, SCSI, SATA, FC), but for all other purposes, have hard drives changed much in the last 10 years that you can remember? i think the technology of solid state disk is still new enough that we can expect to see more performance increases and even power decreases as time goes on.

I think I should actually be able to USE my fucking computer and get 3+ hours. Apple really fucked up with this generation: over-powered, under batteried.
hmm, these findings are definitely counter-intuitive; it’s hard to believe a mechanical HD using less power.

I believe the issue is due to how each uses power. They mention in the article that hard disk access uses more or less power depending on your work (more head movement = more power consumption) while all access to SSD is the same. I bet a HDD has a higher peak and if heavily used can use more power than SSD but average usage probably doesn’t stress disk enough.
will ssds get more energy efficient?

if they’re going in laptops.. you would majorly expect them to

Maybe your battery is just fucked.
Its the second one I’ve had. I think this is just as good as it gets when you actually hit the processor and disk.

Even Guy Kawasaki complains about MBP battery life being sub-2 hour.
Hmm. Well, since you obviously have money to burn, you could try an SSD anyway. It might use more power when reading and writing, but it can instantly go into powersave mode whereas a magnetic disk has to stay ready for a while after its last use. I’m sure that adds up to substantial power savings over time, if your power management settings are done right. No reason to keep an SSD "powered-up" for 15 minutes of idle time, after all, since it can just come back online in a millisecond.

updated. apparently Tom’s Hardware retested with newer drives and found that it wasn’t so clear cut. under different workloads, SSD drives may be more efficient.

No related posts.

i noobed myself by trying to let the mobo handle the raid.
mobo raid from most consumer mobos is fail and aids.

the only mobos that do decent raid are server-grade boards.
here’s my recommendation… assuming you mean SATA-II and you have a PCI-Ex4/8/16 slot available.

I have a rocketraid card and I love it. I would recommend them as well. I think P07 was the one who recommended it to me in the first place and I’m glad I got it.

I’d rather have an Adaptec/HP/Intel… but those are all 3x the cost…. For most people (including my personal workstation) the RocketRAID cards are an excellent value!

SATA-II
PCI-E

dunno about the other stuff.

would be nice to find one that is easy to expand and swap drives.

——
P07, how long would you guess it take to transfer a 4gb file from your desktop to the raid setup (on your workstation)?

.
thanks!

x8 and x16 slot compatible

how would you expand it out to 16?

it’s a x4 card…. so it will only use 4-lanes regardless of what slot you put it in. But a x4 card will physicall fit (and work) in a x8 and x16 slot — although there is no performance benefit for doing so.

kinda sorta. Think of a highway. Each car represents data. The more lanes you have, the more cars you can keep moving quickly, and the more throughput you have.

PCI-Express lanes provide approx 1.5Gbit/sec of usable bandwidth. As a result, a x4 card has a theoretical bandwidth of 6Gbit/sec or 768MByte/sec. That’s more than sufficient for a RAID controller.
Are PCI-Express lanes truly parallel, or can they combine?

parallel lanes essentially imply bonding.

Parallelism in general does not imply bonding. That’s why I asked.
i am not thinking of an instance where parallel would not imply bonding… I think you’d have to explicitly say that it didn’t if that were the case, as bonding is by far the norm.

but to directly answer the question: yes.
are you maybe confusing parallelism between discrete cards vs parallelism between lanes used to access a single card?

they are two different concepts.

Even with 8 3gb/sec drives, this is enough bandwith to not be a bottleneck? Could you explain this a little more or point to a good article?

Also, whys a discrete card > onboard RAID?

a SATA-II interface supports a maximum bandwidth of 300MByte/sec. The reality is that drives cannot actually obtain that speed.

Toms Hardware (I know, I hate them) found the FASTEST drive to be a WD VelociRaptor 10k RPM 16MB cache drive, and that could only get 102MByte/sec read performance.

The very highly recommended Seagate 7200.11 32MB cache drive (my personal favorite) only sustained 81.9 MByte/sec.

The popular Seagate 7200.11 8MB cache drives rated only 63.4 MByte/sec.

So lets assume you used the Seagate 7200.11 drives… 8 drives at 81.9 MByte/sec only use 655.2MByte/sec of bandwidth (max… assuming all drives are running at redline). So the RAID controller still has a nice margin on it.

onboard raid controllers use system ram. Many discrete controllers use their own, and some even allow you to insert a stick of memory in them. onboard raid solutions are almost exclusively the shittiest software-based implementations available. Even the "better" onboard raid solutions are shitty promise controllers. EMF, inductance, and refraction are common problems with onboard raid controllers, so performance is often much less than with a discrete controller. onboard raid controllers are also an extremely common failure point for mobos. replacing the mobo means a new controller, which means you generally lose your raid arrays. discrete cards make it easier to replace components without losing data — even if the controller goes out, you can often get a new one. you also get advanced features such as NCQ with many discrete cards — something that’s not generally available onboard (many mobos have ncq on non-raid channels, but not for raid.

i’m surprised to see you endorsing highpoint

but yeah they make some cool shit for a good price from the little experience i have had with their product. thats what i’d be looking at.

Are Raptors and VelociRaptors the same thing, or is the VelociRaptor a newer model?

velociraptors are new, been out for like a month or so IIRC
Hmm. I wonder how much better they are compared to my Raptors.

I’d like to see a 10krpm 2.5" SATA drive. I know they have them for SAS, but I’m not that rich.

EDIT: Oh shit, it is a 2.5" drive! Now allz I need is four of them plugged into this bad boy:

meh I’m not interested in 2.5" drives for desktops…. I like the 3.5" formfactor. It’s not too big, yet allows more capacity, and more importantly — better cooling over 2.5" drives.

According to that benchmark, the old 74GB 16M cache 10k RPM Raptors actually did WORSE than a basic 7200.10 Seagate

The 7200.10 did 79.8 MByte/sec
The Raptor did 75.3 MByte/sec

To add insult to injury, the Western Digital Caviar 750GB 16M cache drive did 75 MByte/sec….

It seems the VelociRaptor is legit, but the older Raptor was a marketing scam (which coincides with my personal results that showed a Raptor wasn’t worth the cost diff and lack of space).

Not really. The smaller something is, the better its area:volume ratio is. Heat can escape better from 2.5" drives, you just don’t notice in laptops because they have such shitty ventilation. The enclosure I posted has integrated cooling fans.

Not to mention, 2.5" drives have smaller platters and smaller motors, so they use less power and generate less heat in the first place, and the smaller platters also means the reader arm needs to travel less in a worst-case read scenario (i.e. arm on the inside circumference, data on the outside circumference, and v/v), which contributes at least a small improvement in random-seek speed.

So other than that, and the fact that enterprise systems are uniformly moving towards 2.5" disks as a result of those advantages, you’re completely right.

no. SURFACE AREA makes a huge difference. Making things smaller (such as processors) help because less power can be used to get data from a>b. But with hard drives, having a bigger surface area helps.

Take a processor and install a small heatsink…. runs hot.
Take that same processor and install a big heatsink…. runs cooler.

Enterprises are moving towards 2.5" disks for physical SIZE and POWER considerations. Notice they’re also moving towards blade datacenters. But they also run hotter than their 3.5" counterparts. That’s why cooling is also being increased.

That’s sustained-read speed. There’s not much improvement to be had over that, because you can’t cache reads and the bit-density of the platters has more effect on the throughput than anything else. I bought my Raptors to improve random I/O speeds, and my tests with those drives installed showed a marked improvement over the Seagate I had before — 3200 to 5700 PCMark points on the HDD subscore, despite the RAID controller sucking data through a PCI straw.

I’m sorry, but you really don’t know what you’re talking about. The area:volume ratio is paramount when transferring anything (be it heat from a heat source or sugar into a cell) through a barrier, which in this case is the surface of the hard drive.

Yes, if everything else is equal, if the drives make the exact same amount of waste heat and it’s all in direct contact with the outer casing of the drive, then the bigger drive will cool off faster due to more surface area. But everything is not equal; the smaller drive is cooler and the smaller size puts the heat sources closer to the casing, so the smaller drive will dissipate heat better.

You lose. Try to deal with it.
random I/O speeds has more to do with seek time than anything else. The 10k rpm is what gives the raptor it’s advantage in that. Go with a 15k SAS drive and it’s even better.

I don’t see why Seagate doesn’t release a 15k version of it’s high-capacity drives.

Too much heat will increase the platters’ suceptibility to superparamagnetic corruption, and then all that data is gone.

Well I just went to Seagate.com and they list the operating temperature to be 5 degrees celcius HIGHER with the 2.5" version of their 7200.3 2.5" drive (current model) compared to the 3.5" ES2 "enterprise" model.

Same company. Same capacity. Same speed. both recommended for enterprise workstation/servers…. The smaller drive runs hotter.

can’t be any more than a velociraptor…. i mean what I want seagate to do is the same concept.

Then they’ve done something to improve the heat conductivity of the larger drive, perhaps by equipping the larger drive with a single platter instead of two, or something like that. Physics does allow for that, but it’s just a loophole in the rule that if you have two black boxes, one larger and one smaller, with equal heat sources at their centers, the smaller one will stabilize at a lower temperature because the heat can escape more easily.

The Velociraptor will make less heat, though, because its motor is smaller. To do the same with a larger drive equipped with a larger motor, you’d have to decrease the bit density to prevent heat-related failure.

seagate has 2.5" drives…. WD expanded their 2.5" offering to something that was too tall to fit in a notebook, and enclosed it in an aluminum heatsink to bring it to standard 3.5" desktop drive specs. I don’t see why Seagate couldn’t do the same.
Its really annoying that ZFS is there and available so this guy doesn’t need a RAID card – but Sun keeps it locked up by making it GPL incompatible. Then media could be hosted on a linux storage appliance and he could access it however.
i fail to see how ZFS would solve his problem. care to elaborate?

RAID solves three issues:
1) Redundancy — drives can fail, and data is not lost. In fact system keeps going while you replace the drive.

2) Capacity — you can fit much more data on a volume than is typical from a single drive.

3) Performance — you can read and write data faster.
ZFS solves all three of those issues for a home setup. Look up ZFS.

I know the basics of ZFS. It has many cool characteristics. My issues, however, revolve on it’s "RAID-Z" being software-based… Which signifigantly reduces it’s usefulness for various operating systems. There are also performance concerns that I would have — although I don’t know where ZFS ranks on that. Also, my understanding is that there is no quota system…. lame. Also, I don’t think you can add a new disk and grow a RAID-Z implementation.
ZFS doesn’t have the problems that traditional software raid does. And yes, you can grow a raid-z array.

i recall it being a problem that you couldn’t add drives once it was created.
Worth it to take a look on eBay for Perc5/i pulls. Those are just badged LSI MegaRaid 8408s. Pretty easy to find with BBU and cache for $120 or so.

SATA?

Yes, SAS/SATA

I have 2

The ZFS Boot project successfully added boot support to the OpenSolaris project in March 2007.

But its not in Solaris yet, I don’t believe. You would expect ZFS using appliances to run OpenSolaris. Or BSD. Or even OS X when that port hits. Probably the mac mini will allow you to have a zpool for your media storage eventually.

But ogre is right: you can’t dynamically grow a raidz zpool just yet. You can with JBOD/mirrored ones, but not striped.

SATA and SAS. You can get 15K SAS drives for $200 bucks, 3 of those in a RAID-5 screams, I sustain 200MB/s R/W.

why don’t i see any ports on the card(s)?
There should be two ports in the rear. You need 1 or 2 breakout cables to plug in your drives, 4 drives per cable.

EDIT: Looking at the ones I see on eBay, they either have external ports or on the top behind the memory.

So you know, breakout cables can be pretty expensive.

Adaptec has some out for <$20 for 1m. They’re pretty nice.

I’m running a Perc5/i too.

Damn. I know that when I got my cards, the one I couldn’t use had one 2 breakout cables with it. The other 2 I have didn’t come with any cables and when I was looking online I was seeing ~$100 per for cheap ones. I ended up just getting some nice but long as hell ones from the place I got my cards at for free.
With the perc5, I will have to run the breakout cables from the back of my tower (the ports only appear to be on the outside), back into the tower to connect to my drives?

Not necessarily. They have ones with external and others with internal connections. Just get an internal one. I’m not positive but looking at eBay it seems the Perc5/e is the external and the Perc5/i is the internal ones (gotta love the logical naming). Just check the descriptions, it should say.
The Perc5/i has no external ports. The Perc5/e has external ports only. The Perc5/e is usually significantly more expensive than the 5/i too.
so why do you need a raid card? im running my 1st raid0 setup with my Asrock motherboard and its worked ok say far……besides if its raid0 couldn’t it bottleneck at the PCI ports? running multiple drives?
running raid5 with four 500gb WD drives using the raid setup on my motherboard. want a nice card so i can expand the raid when needed.

shit is slow to say the least.

Because onboard RAID uses the CPU instead of bringing its own processor to the party, and because if it dies, good luck finding another controller that’s compatible.

With crazy numbers of cores happening – how long before RAID cards are obsolete? Why NOT do RAID calcs in one core, or several, if we’re going to have so many? Yet another reason why ZFS is so darn neat.

There’s a couple of reasons why general-purpose hardware will never replace dedicated hardware:

1. General-purpose hardware is less secure. I don’t want my RAID controller to jump from core to core as the operating system sees fit, I want it to keep its head down and do its thing, undisturbed by anything else going on in the system. You can just imagine how much fun hackers would have trying to write viruses that fuck with ZFS RAIDs, or RAIDs running Microsoft’s inevitable proprietary clone of ZFS.

2. General-purpose hardware is slower. Yes, CPUs are getting faster, but why would I want to give up any of my processing power to what should be a transparent background process, and why would I want to run that transparent background process on something that gives me lower throughput than a dedicated card would have?

3. General-purpose hardware is less stable. Remember WinModems? Yeah.

4. You can’t boot from a software RAID; the array needs to be a black box as far as the OS is concerned, otherwise there will have to be a non-redundant partition that contains the RAID drivers. I’m not interested in such nonsense.
This sounds exactly like an argument for a mini-computer. And 4 is just plain wrong.
thanks for all the help.

i ordered the Perc5/i, cable, and scored three 1tb drives.
I am thinking about grabbing a Perc5/i tomorrow.

That type of cache/ram does it use?

Does Vista include needed drivers for the card?

And is there different types of Perc5/i or are they all the same?

Also what type of cables does it use?

Correction: The only way you can boot from a software RAID is if the boot loader, the kernel, and the RAID driver can fit in a single stripe on a single disk. Which is to say, it’s a hacked solution.

As evidenced by the built-in hardware microcontrollers that ALL hard drives use nowadays, it’s better for storage management to be delegated to something that doesn’t have anything else weighing on its tiny silicon mind.
Yeah. And Math should be done on a math co-processor. Its OBVIOUS, isn’t it?
You guys take too long to reply, so i ordered it anyways

DDR…forget what speed

Doubt it

There are two types. Perc 5/i and Perc 5/i Integrated. The vast majority on ebay are the integrated type. Functionally they are the same.

SFF-8484 -> whatever your backplane or drives use. Generally it will be SFF-8484 -> 4x SATA fanout cable. Adaptec makes a couple of those cables that are pretty nice for quite cheap. I have an extra one I’ll sell you.

I believe it uses DDR2 according to the other sources I found…

I bought this cable, will it work?

Where would I find drivers for the card?

You’re right it does. I just remembered and was about to edit my post.

Yes that is the type of cable you want.

Dell has them. They’re listed under PowerEdge 2950 if you need Win 2k3 drivers or Precision 490 if you need XP or Vista drivers.

It is done on a math coprocessor. Math coprocessors used to be separate, but even though they’re on the same die as the CPU nowadays, they still consist of dedicated circuits that do nothing but whatever the hell math coprocessors do.

If you design me a CPU with an integrated storage processor and 64MB of dedicated RAM, I’ll consider using it.

Sweet. Thanks.

I don’t have to design it. You’ll be getting the functional equivalent in a few years from Intel. And ZFS or a child of ZFS is the filesystem you’ll be running.
No, it won’t be the filesystem I’m running. Because I won’t be running a filesystem that will be redundant with my dedicated RAID controller, regardless of whether it’s on the CPU die or in a PCI-Ex slot.

i paid around $30 for the same cable!

correct 490 driver?

or

The first one is a Windows Server 2k3 driver. The second is a firmware update for the card.

Dell’s support site just started acting up for me or I’d give you the R numbered filename to look for.
if install a new OS will all the data on the raid be safe?

the card was real easy to install and setup!
The data on the RAID will be as safe as the data on a single drive. The only thing you need to worry about is whether the new OS will have a driver to talk to the RAID controller. Even if you don’t have a driver, though, that won’t cause the RAID to fail, it’ll just make it inaccessible until the driver is installed.

I have an old Raptor and did some stress testing. A lot of poor mechanics that made the drive fail back and the day. Not to mention big heat issues.
It’s definitely a hot little bugger, but no hotter than comparable 10krpm SCSI drives. The biggest problem it has is that it was sold to people who didn’t realize that a high-performance disk would need actual cooling, and so a lot of the poor things just overheated and died.

I was one of them, to be honest. Fortunately, I wised up when I saw my case temperature readout, and I bought a hotswap rack with a dedicated exhaust fan. They’re still hot, but they’re at least stable now.

Back to this fight.

I started looking up software RAID on Linux and I found a writeup on the matter of software raid vs hardware from a linux engineer that makes good sense. There is no one solution to rule them all, but software raid seems appealing enough for me to seriously consider.

I might try it on this comp to see about the performance impact, I mean, I don’t have to spend. My trouble is however that my disks have irregular sizes, and I need to sort the bastards out aswell.
On a side note. I wonder if FDE (full data encryption) drives will come to the consumer market in the next few years.

I read the link. Thing is – ZFS isn’t software RAID. Its an evolution of raid and filesystems. Its a big leap forward. Thats why duex doesn’t get it, and its why we’ll all be using it or one of its descendents in the future. Read up on it. Its really neat.

"Equipped with a hi-speed 9500RPM double roll ball-bearing cooling fan"

wtf steroid fan?

9500 RPM is no big deal for a 40mm fan
Yeah, it’s not going to make much noise; it’s too small.

Size of the fan doesn’t matter when it comes to motor noise. I don’t give a shit how big a fan is, but a 9500 is going to be loud as fuck. Just from google, the NMB and Delta ones I’ve found are around ~42dBa, which is pretty damned loud.

Check out Sunon’s fans. They’re surprisingly quiet.

In any event, you can always put a slower fan in there if it bothers you too much.

there are plenty of SW /linux/open source based units and solutions out there.. FreeNas, Drobo, etc,etc..

My FreeNas unit is kicking ass for over a year on R5 and 8 drives now..

HMM you are right enough, I just read this about RAID-Z (VERY NICE):

I’m gonna setup a software raid, tidying my disks now. I feel pissed off about still the small possibility of corrupting much of my data explained in that blog. Will have to see if there’s anything I can do.

Although I do agree that it’s not the typical software raid logic, it’s not evolutionary by any means. Been done before on tru64 with advfs which is now open source, fs’ on vms, and wafl on netapp NAS’ (which is why there is a lawsuit).

i’m still not satisfied with it yet. i’m still telling everyone to stick to veritas, lvm2, and disk suite here.

All I want is my data to be safe, so what would you recommend to me?

I didn’t know lvm2 could do anything for me..

safe from what

Safe from disk failures, power outages, disk corruption and the like.

disk failures: raid 1, hardware or software

power outages: ups that tells hosts to perform a graceful shutdown after x minutes

disk corruption: chronic backups to another media, offsite if it’s important.

and the like: good admin habits.

They’re already here. Check out Seagate and Fujitsu.

If it’s the filesystem to end all filesystems, then I’m still going to wait for a native hardware implementation. I see no reason to waste CPU cycles doing something that every computer is guaranteed to do, when I could be using those CPU cycles running programs that only I care about.

EMC DMX + UPS + offsite = maybeeeeeeeee

no such thing in life as "guarantee" except death… (no taxes here)

There are many things every computer to a high degree of accuracy does and you’d be waiting a long time for hardware implementations. e.g. in the realm of the internet: html, javascript, xml decoding.

I prefer the idea of software raid because 1. no spending on raid card (Money spent on a raid card can go into memory and cpu upgrades), 2. disks don’t need to be equal size – as the OS can work on the partition level, incredibly useful. ZFS can work on it’s filesystem level for extra-cool data recovery (explained in that blog post).

I’m just unsure about performance impact and hardware bottlenecks.

thank you crontab. I might invest in a UPS.

No related posts.

i’ve only specified block size on the creation of a file system. there are block sizes or chunks on a SAN volumes, but one normally cannot change that.

is it a stripe in any way on the vxvm volume. are the stripe widths a denomination of the block size they want? but an 8k width is probably too big.

I would tell them that they are out of their mind.

i hate dba’s who like to dictate storage etiquette. we’re not in 1995 anymore.

i hear you. i wish dbas would just get the fuck out. tell me what your IO requirements are instead of telling me how many spindles you think you need.

anyway, i told him to knock it off. there is no block sizing for volumes and i’m not even going to mention stripe sizing.

don’t mention a thing. the more you tell them how your storage is architected, the more they want to "tune it". Tune it with methodologies pertaining to old ass single scsi JBOD setups of course.

When I first started here, the dba manager demanded that latency for all their oracle files systems be sub 2ms all the time.

"Are your app/db’s performing slowly at peak times? All the time? Indexing too slowly?"

"i don’t know, I just look at the graphs you generate and I think latency should be close to 0."

"Okay, let me see what I can do"

So I got veritas, sun, and hitachi in a con call to literally tell her she was nuts. I haven’t gotten an insane request from her since.
Just to chime in, there is no way to set a block size of a volume, just the filesystem…

FWIW we use 8k block sizes for our database and archive log volumes here, there is a huge performance increase over the default Veritas 1k block size for DB filesystems, just FYI. Its really simple to do and theres not really a tangible disadvantage to doing it during the creation of the filesystem.

yeah, he started pushing that one and i put up a bit of a fuss just because the guy is irritating, but i know doing 1 IO vs doing 8 will help a lot. i just like to give DBAs a hard time.

just an example, i was on vacation two weeks ago and one of the DBAs sent an email asking what storage a particular filesystem was on (for whatever reason, my company has our production systems on about 4 or 5 separate storage arrays from HDS, Storagetek and EMC). i couldn’t help myself but respond, "what is your question? are you having a performance issue that you need to resolve? if so, please ask that and don’t worry about the particulars about the storage."

No related posts.

If you want to keep it, I’d turn it into a Mini-ITX box.

Do you mean hard to source or physically hard ot get to? It looks like it uses ATA/33 drives or ultrawide SCSI which aren’t that hard to find. It also has USB ports and a PCI slot to add an SATA card.

Slow proc like deusex said, but it’s not a workstation it’s an appliance.

Yeah, it’d be sad slow if you used the HW that’s inside, even for a base linux build . FreeNAS would even choke.

I have a Raq box I keep in my closet that I use for DNS

lol
if its not doing anything right now just throw it away. Something compatible can be bought for less than 100$ and would save electricity and heating costs.
I still think it would make a good Mini-ITX box. No reason to throw out a perfectly good case, one which looks better than most no less.
I think I am going to try a mini-computer/sleeper setup (i.e. a little box that packs a punch in the performance dept.)

We’ll see just how much I can cram into it. I got this thing from my job…the old tech bought it, and I was told he had it hooked up for all of a month, then he just put it in his closet, and there it sat.

I couldn’t find any CDs or documentation at the office, but later downloaded these things.

I just popped the top on it and it has 128MB RAM, and 2 HDs in it…dunno what size yet. Raid setup, perhaps? I’m not sure if it came with this, or if he upgraded it.

It is the Professional Edition, if that means anything. I’m still researching.

Now, my only thing with the mini-itx boards is this…

See that board? Notice the VGA and other various connectors? Well, the case is not made for those, so how in the heck am I supposed to find a board for this thing?
Get out the dremel and get to modding. It probably has a non-standard board in it (along with non-standard mounting points).

No related posts.